Jul 11, 2012
Tokyo Electron and imec to Accelerate Directed Self-Assembly (DSA) Development
July 11, 2012 - Imec and Tokyo Electron (TEL) announce that they will accelerate their Directed Self-Assembly (DSA) activities at imec's recent 300 mm fab-compatible DSA process line. Over the past two years, both companies have been actively engaged in DSA development. Based on promising results achieved on imec's 300 mm DSA process line, imec and TEL will now expand their focus to explore DSA as a cost-effective and manufacturing viable patterning technique for 2x and beyond technologies.
Recent evaluations have demonstrated the feasibility of DSA to enable frequency multiplication through the use of block copolymers. Line features as small as 12.5 nm and 25 nm contact holes have been patterned on 300 mm substrates at imec using pre-patterned lithography followed by DSA. In recent experiments using pre-patterned EUV holes, on wafers processed on TEL's CLEAN TRACK LITHIUS Pro coater/developer interfaced to ASML's NXE:3100, DSA repaired defective features, lowered line edge roughness (LER) and improved critical dimension (CD) uniformity.
But for widespread DSA implementation, lower defect levels are required, and DSA needs to be integrated into existing process flows. Imec and TEL are therefore investigating various integration scenarios for line and hole patterning. Furthermore, comprehensive evaluations to understand material and process interactions on CD uniformity, LER and defect levels are planned. Imec and TEL aim at delivering electrical functional devices using DSA.
To push the capabilities of DSA beyond lab-scale environments, one of the world first 300 mm fab-compatible DSA process lines all-under-one-roof was recently implemented in imec's 300 mm clean room fab. In addition to TEL's especially configured DSA coater/developer managing gallon-sized quantities of block copolymers, and TEL's dedicated etch system supporting the DSA pattern transfer, imec has the necessary metrology, cleaning and pattern transfer toolsets. To complete the DSA process line and accelerate R&D on DSA at imec, TEL will provide imec with new hardware within the next few months.
"With specially configured DSA coater/developer and etch systems at imec, we have the capability to explore DSA as a potential candidate for next-generation patterning technology", commented Chung Gishi, Executive VP of Tokyo Electron Ltd. "We hope to understand the critical processes necessary to move early stage development into volume production to benefit our customers".
"DSA continues to show much promise as part of the toolbox for advanced sub-20 nm patterning. Our collaboration with Tokyo Electron has enabled us to rapidly implement DSA processing knowledge that has been developed in academia at the group of Prof. Paul Nealey (University of Wisconsin at Madison) into a representative manufacturing environment. We are excited to extend this effort to dedicated newly developed DSA modules. Early access to this equipment allows us to identify and overcome the critical issues to make DSA ready for implementation into the manufacturing processes of our partners." commented Kurt Ronse, Director Lithography Department at imec.
Imec performs world-leading research in nanoelectronics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, US, China, India and Japan. Its staff of close to 2,000 people includes more than 600 industrial residents and guest researchers. In 2011, imec's revenue (P&L) was about 300 million euro. Further information on imec can be found at www.imec.be.
Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a "stichting van openbaar nut"), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shangai) Co. Ltd.) and imec India (Imec India Private Limited).